Resin Systems

 CR3400 Hardener Standard 5.7kg

CR3400 Hardener Standard 5.7kg

202.92€

Ampreg 36 Kit Resin / Hardener Slow 4.26kg

Ampreg 36 Kit Resin / Hardener Slow 4.26kg

181.53€

Ampreg Hardener 3X 19kg FAST

Ampreg Hardener 3X 19kg FAST

492.25€

Ampro Clear Kit Resin/ Fast Hardener 1.33kg

Ampro Clear Kit Resin/ Fast Hardener 1.33kg

59.28€

Prime 27 Resin 18.6 kg

Prime 27 Resin 18.6 kg

267.09€

 CR3400 Resin 19kg

CR3400 Resin 19kg

569.01€

Ampreg 30 Resin 18kg

Ampreg 30 Resin 18kg

396.72€

Ampreg 30 Resin 219kg

Ampreg 30 Resin 219kg

4,014.87€

Ampreg 31 Kit 4.66kg Fast

Ampreg 31 Kit 4.66kg Fast

156.08€

Ampreg 36 Kit Resin / Hardener Fast 4.26kg

Ampreg 36 Kit Resin / Hardener Fast 4.26kg

181.53€

Ampro Bio Kit Resin / Slow Hardener 1.30 kg Pack

Ampro Bio Kit Resin / Slow Hardener 1.30 kg Pack

49.68€

Ampro Clear Kit Resin/ Slow Hardener 1.33kg

Ampro Clear Kit Resin/ Slow Hardener 1.33kg

59.28€

Prime 37 Resin 16.2 kg

Prime 37 Resin 16.2 kg

368.36€

Ampreg 30 Kit Resin / Fast Hardener 4.66kg Pack

Ampreg 30 Kit Resin / Fast Hardener 4.66kg Pack

150.50€

Ampreg 36 Resin 16.2kg

Ampreg 36 Resin 16.2kg

436.86€

Showing 1 to 15 of 29 (2 Pages)

Resin Systems

Gurit is a leading supplier of high performance epoxy products formulated to meet market and customer needs. Gurit’s innovative approach and expertise in epoxy formulations continues to deliver market leading products for a wide range of market segments. Gurit provides a complete range of formulated products from in-mould gelcoats to multi-purpose systems.


Laminating Systems 

The Ampreg™ wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy. 


Infusion Systems  

The PRIME™ infusion system from Gurit has been used successfully for the single operation moulding of components ranging from narrow carbon yacht masts, up to 80' yacht hulls and wind turbine blades. PRIME™ infusion resin has a much reduced viscosity and longer working time, which makes it ideal for infusing very large parts with complex reinforcements in one operation.  

PRIME™ epoxy infusion systems are at the forefront of the development of liquid epoxies for "under the bag" infusion processes, such as SCRIMP™, RIFT (resin infusion under flexible tooling), and VARTM (vacuum assisted resin transfer moulding).