We supply a full range of composite consumables including
Fluffy Breather fabric
Knitflow Mesh
Wide range of Peel Ply
Perforated Film
Vac Bag in various sizes and widths
Tacky and Shrink Tape
PTFE Teflon
3M Glue Spray
Mixing Boards
We have a wider range in stock than shown on the website, for a full list of sizes available in Peel Ply and Vac Bag please contact us on: sales@thecompositestore.com
Model: SB 250
COMPOFLEX 250Compoflex 250 is a peel ply, release film and breather, used to control flow rate and release consumables from a composite laminate. Compoflex 250 generates a very smooth surface ideal for painting of the composite laminate. For secondary bonding we recommend Compoflex SB 250. Rel..
447.70€
Model: Knitflow 100-165
Knitflow is designed to assist resin flow through the part during the vacuum assisted resin infusion process when elevated temperatures are used. Our resin flow medium works well with polyester, vinylester and epoxy resins. This product is a knitted flow medium.Roll Width: 2.5mRoll Length: 80mm2 Rol..
777.92€
Model: RF-3900-R-P3N
Red, low temperature release film – 30 micron thickness Roll size 1.5 metres wide x 375 m2 roll - perforated.A highly flexible,perforated, polypropylene based release film. Suitable for use with epoxy prepreg up to 150°C and may be used in resin infusion applications.RF-3900-R-P3N is a flexible..
173.46€
Model: A005
A non-porous, PTFE coated, woven glass fabric with a high temperature, pressure-sensitive, silicone adhesive backing. Ideally suited for use as a reusable tool-surface release ply, on flat or single curvature surfaces.The PTFE coating provides release from all types of resin systems, however, the ..
554.50€
Model: TUBO/10/12/100
Polyethylene tubeDiameter 10/12mmThickness 1mmRoll Length 100LMMaterial LDPETranslucent ColorTemperature 90C/194FFor vacuum processes, both for resin supply and for air evacuation. Available in various diameters, it withstands the temperature and pressure generated by the vacuum, without collap..
28.08€
Model: VACtite O (75) 60VS-150
Vac Bag 1500mm - 250lm (orange) - TUBEVACtiteO(75)60VS-150..
597.97€
Model: SB 250
COMPOFLEX 250Compoflex 250 is a peel ply, release film and breather, used to control flow rate and release consumables from a composite laminate. Compoflex 250 generates a very smooth surface ideal for painting of the composite laminate. For secondary bonding we recommend Compoflex SB 250. Rel..
4.81€
Model: Knitflow 100-165
Knitflow is designed to assist resin flow through the part during the vacuum assisted resin infusion process when elevated temperatures are used. Our resin flow medium works well with polyester, vinylester and epoxy resins. This product is a knitted flow medium.Roll Width: 2.5mRoll Length: 80mm2 Rol..
4.31€
Model: RF-3900-R-P3N
Red, low temperature release film – 30 micron thickness Roll size 1.5 metres wide x 375 m2 roll - perforated.A highly flexible,perforated, polypropylene based release film. Suitable for use with epoxy prepreg up to 150°C and may be used in resin infusion applications.RF-3900-R-P3N is a flexible..
1.45€
Model: A005
A non-porous, PTFE coated, woven glass fabric with a high temperature, pressure-sensitive, silicone adhesive backing. Ideally suited for use as a reusable tool-surface release ply, on flat or single curvature surfaces.The PTFE coating provides release from all types of resin systems, however, the ..
27.41€
Model: A-14 per LM
Roll Length: 100mRoll Width: 1.5mRoll Weight: 150gmsAbsorption / Bleeder MaterialAbsorbent fabric to allow evacuation of air in vacuum processes and retain excess resin during the manufacturing process...
2.95€
Model: CSM 300g
300gsm chopped strand mat glass reinforcement using a powder binder. Because the powder binder breaks down physically, rather than by a solvent in the resin, powder-bound CSM can be used with solvent-free resins, such as epoxy...
2.80€