Ampreg 30

Ampreg 30 Resin 18kg

Ampreg 30 Resin 18kg

394.17€

Ampreg 30 Resin 219kg

Ampreg 30 Resin 219kg

4,369.40€

Ampreg 30 Kit Resin / Fast Hardener 4.66kg Pack

Ampreg 30 Kit Resin / Fast Hardener 4.66kg Pack

156.07€

Ampreg 30 Kit Resin / Slow Hardener 4.66kg Pack

Ampreg 30 Kit Resin / Slow Hardener 4.66kg Pack

156.07€

Ampreg 30 Kit Resin / Extra Slow Hardener 4.66kg

Ampreg 30 Kit Resin / Extra Slow Hardener 4.66kg

156.07€

Ampreg 30 Kit Resin / Fast Hardener 1.26kg Pack

Ampreg 30 Kit Resin / Fast Hardener 1.26kg Pack

50.41€

Ampreg 30 Kit Resin / Slow Hardener 1.26kg Pack

Ampreg 30 Kit Resin / Slow Hardener 1.26kg Pack

50.41€

Ampreg 30 Kit Resin / Extra Slow Hardener 1.26kg Pack

Ampreg 30 Kit Resin / Extra Slow Hardener 1.26kg Pack

50.41€

Ampreg 30 Resin 3.7kg

Ampreg 30 Resin 3.7kg

123.92€

Showing 1 to 9 of 9 (1 Pages)

Ampreg 30

Ampreg 30 is a low toxicity laminating system; good wet-out & mechanical properties.  Intended application for manufacture of large composite structures in the marine, wind and construction industries.  Low initial mixed viscosity & good cure progression from ambient only cures,  DNV-GL Certified,  Replaces Ampreg™ 21.  Ampreg™ 30 has been optimised for the manufacture of large composite structures using hand layup and vacuum bagging techniques. The relatively low initial mixed viscosity of Ampreg™ 30 allows easy wetout of heavyweight reinforcements.  Ampreg™ 30 has been designed to give excellent mechanical and thermal properties from both ambient temperature cures, and moderate temperature postcures (50°C).  This system is available with a range of hardener speeds, from Fast to Extra Slow. The unique formulation offers improved health & safety through the careful selection of low toxicity raw materials as well as Light Reflective Technology which in conjunction with a UV light-source can detect droplets as small as 1mm for easy identification of contamination to improve industrial hygiene.