Compoflex products are breathable micro-porous peeling materials, designed to replace up to three consumables – peel ply, release film and breather – with a single layer in composite manufacturing.
Compoflex for vacuum moulding
In the vacuum bagging process, the lay-up consists of a laminate, peel-ply, release film and a breather/bleeder fabric. Compoflex can replace all of these products, simplifying the process.
Chopped Strand Mat
300gsm chopped strand mat glass reinforcement using a powder binder. Because the powder binder breaks down physically, rather than by a solvent in the resin, powder-bound CSM can be used with solvent-free resins, such as epoxy.
Model: SB 250
COMPOFLEX 250Compoflex 250 is a peel ply, release film and breather, used to control flow rate and release consumables from a composite laminate. Compoflex 250 generates a very smooth surface ideal for painting of the composite laminate. For secondary bonding we recommend Compoflex SB 250. Rel..
447.70€
Model: SB 250
COMPOFLEX 250Compoflex 250 is a peel ply, release film and breather, used to control flow rate and release consumables from a composite laminate. Compoflex 250 generates a very smooth surface ideal for painting of the composite laminate. For secondary bonding we recommend Compoflex SB 250. Rel..
4.81€
Model: CSM 300g
300gsm chopped strand mat glass reinforcement using a powder binder. Because the powder binder breaks down physically, rather than by a solvent in the resin, powder-bound CSM can be used with solvent-free resins, such as epoxy...
8.88€
Showing 1 to 3 of 3 (1 Pages)