S-Fair Fast Hardener 2.5L

S-Fair 600

Sag resistance up to 35mm on vertical surfaces
Easy to sand
Simple 1:1 mix ratio by volume
Available with two hardeners; Fast and Standard
Cured density of 0.93-0.94 g/cm3

Shelf-life          2 Years                        Sag Resistance 35 mm

Working Time 10 / 45 Mins               Sanding Time  5 / 15 Hrs

Mix Ratio         1:1 pbv                        Mixed Colour  Orange / Grey

Cured Density  0.93 g/cm3

S-Fair 600 Epoxy Fairing System

S-Fair 600 is a simple 1:1 by volume, two component filler designed for filling and fairing large composite and metal structures such as hulls and decks. It can be applied up to a thickness of 35mm on a vertical surface. It is easy to sand and is compatible with a wide range of primers and top coats typically used in the marine market for the finishing of yachts. It is available with two hardeners; Fast and Standard, which enables the customer to tailor the working/cure time to the ambient workshop temperature.

S-Fair 600

Sag resistance up to 35 mm on vertical surfaces
Easy to sand
Simple 1:1 mix ratio by volume
Available with two hardeners; Fast and Standard
Cured density of 0.93-0.94 g/cm3

Shelf-life          2 Years                        Sag Resistance 35 mm

Working Time 10 / 45 Mins               Sanding Time  5 / 15 Hrs

Mix Ratio         1:1 pbv                        Mixed Colour  Orange / Grey

Cured Density  0.93 g/cm3

S-Fair 600 Epoxy Fairing System

S-Fair 600 is a simple 1:1 by volume, two component filler designed for filling and fairing large composite and metal structures such as hulls and decks. It can be applied up to a thickness of 35mm on a vertical surface. It is easy to sand and is compatible with a wide range of primers and top coats typically used in the marine market for the finishing of yachts. It is available with two hardeners; Fast and Standard, which enables the customer to tailor the working/cure time to the ambient workshop temperature.